RoS Built-In Screen Kit Golf Simulator Enclosure
Starting at $930
- Cut to your exact wall opening, down to the inch
- Rigid head holds the top edge straight, not a sagging cable
- Simple pricing by the linear foot of wall width
- Flaps, cable and hardware included
Tell us about your room
What is your room width?
Finished wall to finished wall, in inches. If you are between marks, round up.
What is your ceiling height?
Top of your finished floor to the finished ceiling, in inches. Measure the lowest point.
How deep is the room?
Screen wall to the wall behind you. Past 20 ft it stops mattering, so 20'+ is fine.
Inside the shaded range we price it here. Outside it we will want to talk first.
Not sure how to measure? Read the guide
Pad your side walls
Optional. Two inches of matte black foam where shanks and heel strikes land, so the drywall behind stays drywall. It also kills projector glare bouncing off the side walls.
How far back should padding run?
Measured back from the screen wall. Panels fill the full height of the wall and step back one 24 inch panel at a time.
Left wall
Right wall
Pad your ceiling
Optional. The same panels overhead, running back from the screen. Catches the thinned shot that goes straight up, and stops the ceiling throwing projector light back down onto the screen.
How far back should the ceiling run?
Full width of the room, stepping back from the screen wall one panel at a time.
Panel counts are a starting point. Our team can lay the pattern out around your outlets, trim, vents and lighting before anything ships.
Your screen
Let's talk about this one first
We build these rooms, and yours has something in it worth a two minute conversation before you spend money. No pressure and no obligation.
Built to your wall width. We will ask for three measurements before this goes in the cart.
Ships in 3 - 4 Weeks (Made To Order)
“Rain or Shine really knows their stuff. They found the right sim bundle for my space and spent hours working through my questions.”
Brian A. · Colorado
Built To Your Room
WE MAKE THE SCREEN FIT THE WALL
A stock screen is a size somebody else picked. This one is cut to the opening you actually have, down to the inch, so the picture fills the wall instead of floating in the middle of it with dead space either side. You tell us the room. We work out the largest screen it will genuinely take, with the clearances a real build needs.
The Head
A RIGID TOP, NOT A CABLE
A projector throws a perfect rectangle. A cable hangs in a curve. Hang a screen on cable alone across a fourteen foot bay and the top edge settles into a shallow arc, and that arc becomes the border of every image you project. We run a rigid member across the head and hold that edge straight. The sides and the bottom still tension the way they should.
Your Ceiling
HEIGHT COSTS YOU NOTHING
Our material comes on a ten foot roll and the screen height runs across it, so a taller room does not use more of it. That means the price is set by your wall width alone. A ten foot ceiling and an eight foot ceiling in the same width room pay the same. Nobody gets charged for having a nicer basement.
In The Box
THE WHOLE HEAD ASSEMBLY, NOT JUST FABRIC
Screen, transition flaps, the rigid head sections, tension cable, turnbuckles, corner pulleys, eyelets and fasteners. The framing ships in lengths that fit a normal parcel, so there is no freight appointment and no waiting on a truck. It goes together with a drill and a level.
Before We Cut
SOMEBODY CHECKS YOUR NUMBERS
This is made to order, so a wrong measurement becomes a wrong screen. Before anything is cut we confirm your dimensions with you directly. It is a short conversation and it has saved more than one room. If something looks off, we would rather find it now than on install day.
Free Shipping
IN THE BOX, NOT ON A PALLET
The head framing ships in sections rather than one long member, which keeps the whole kit inside normal parcel shipping. That is why it arrives in days rather than on a freight schedule, and why shipping is included rather than quoted. Rooms wider than eighteen feet are the exception and we will quote those directly.
From Our SimSquad
THE TOP EDGE IS THE ONE YOU LOOK AT
Everybody obsesses over screen material and nobody thinks about the head. But the top edge is the border of every image you project, and it is the one line in the room your eye checks without being asked. Hang it on cable and it sags, gently, in the middle, and once you have noticed it you cannot stop noticing it. That is the whole reason we put a rigid member up there and hold it to an eighth of an inch. It is not the expensive part of this kit. It is just the part that decides whether the bay looks built or looks rigged.
What is the Built-In Screen Kit?
It is a wall to wall impact screen and head assembly, built to the exact opening in your room. No pipe frame standing in the space, no stock size that nearly fits. The screen mounts into your existing wall and ceiling framing, the rigid head holds the top edge straight, and transition flaps close the gap between the screen and the wall so the bay reads as a finished room rather than a piece of equipment sitting in one.
Why Built-In Instead Of An Enclosure
A freestanding enclosure eats floor space and always looks like a structure you put in a room. A built-in screen disappears into the wall. You get more usable depth, a cleaner room, and a bay that a spouse will tolerate in a finished basement. The trade is that it is permanent and it has to be measured properly, which is why every one of these gets checked by a person before we cut anything.
Not sure your room will take one? Measure it first, then tell us the numbers. If your space is not right for a built-in we will say so rather than sell you one.
Frequently Asked Questions
You do not size the screen, you measure the room and we size the screen. Width, ceiling height and depth, plus anything in the way like a soffit or a beam. The room builder on this page will show you what fits before you order.
The build absorbs a fair amount of error, and we confirm every set of dimensions with you before cutting. If you are unsure, round up rather than down. A screen slightly under your wall is covered by the flaps. A screen slightly over does not hang.
No. The screen height runs across the roll, so a taller room does not consume more material. Price is set by your wall width alone.
The finished screen tops out at 117 inches, which is the roll width less the cable pocket. In a room taller than about ten and a half feet the screen stops climbing and a ceiling flap covers the difference. Past eleven feet a bulkhead is the better answer and we should talk.
The top edge is the visible border of your projected image. A cable spanning fourteen feet sags around an inch at midspan, which puts a shallow curve across the top of every picture. A rigid member holds it straight. The sides and bottom are still cable tensioned.
Yes, if you are comfortable finding ceiling framing and working off a ladder. The head anchors into your joists, the sections bolt together, and the screen ties on. If you would rather not, we install these ourselves.
In a box. The head framing comes in sections rather than one long piece specifically so the kit stays inside normal parcel shipping, which is why it arrives in days instead of on a freight appointment. Rooms over eighteen feet wide are quoted separately.
Wall padding, the projector, the launch monitor, the mat and the turf. This is the screen and its head assembly. If you want the whole bay handled, that is what our design and install team is for.
| Impact screen | ✓ Cut to your opening, triple layer |
| Transition flaps | ✓ Sides and head |
| Rigid head framing | ✓ Sectioned to ship parcel |
| Tension cable | ✓ Sides and sill |
| Turnbuckles | ✓ 2, hook and swaged eye |
| Corner pulleys | ✓ 2 |
| Eyelets and fasteners | ✓ Included |
| Dimension check before cutting | ✓ Every order |
| Room width | 9 ft to 20 ft, 14 ft+ to center the tee |
| Ceiling height | 8 ft 6 in to 11 ft, 9 ft to 10 ft 6 in ideal |
| Room depth | 13 ft minimum, 15 ft or more ideal |
| Max finished screen height | 117 in |
| Head frame height above floor | 126 in max |
| Screen top edge straightness | Held to 1/8 in |
| Rooms outside these limits | Talk to our team first |
| Free shipping | Rooms to 18 ft wide |
| Lead time | Made to order after your dimensions are confirmed |
| Built-In Screen Kit $$ |
Freestanding Enclosure $$ |
Stock Size Screen $ |
|
|---|---|---|---|
| Cut to your exact opening | ✓ To the inch | — | — |
| Rigid head, straight top edge | ✓ Held to 1/8 in | Varies | Cable or grommets |
| Takes no floor space | ✓ Built into the wall | — | ✓ |
| Taller ceiling costs extra | ✓ Never | Yes | Yes |
| Transition flaps included | ✓ Yes | Sometimes | Usually extra |
| Ships parcel, no freight wait | ✓ To 18 ft | Freight | ✓ |
| Dimensions checked before cutting | ✓ Every order | — | — |
| Looks like a finished room | ✓ Yes | Looks like equipment | — |
| Sim-Specialist Support | Yes | — | — |
| Same team can install it | ✓ Yes | — | — |
| You’re Here | · | · |
Free Shipping on Most Items
Free standard shipping on most orders within the continental US. No minimum order. Exclusions apply for oversized and freight items.
Hassle-Free Returns
Not the right fit? We offer a 30-day return window on accessories in original, unopened condition. Contact us to start a return.
Secure Packaging
Every accessory ships in protective packaging with full materials. Arrives ready to use, right out of the box.
Real Human Support
Questions about your order, shipping timeline, or return? Our team is here. Reach out anytime.
Why Buy From Rain or Shine Golf?
Simulator Specialists
We sell golf simulators exclusively. No TVs, no fitness equipment, no distractions. Every product we carry has been evaluated by our team. We know what works and what doesn't.
Free Expert Consultation
Our SimSquad team helps you find exactly what fits your space and budget before you buy. Talk to SimSquad →
Trusted Since 2016
We've been building out home simulators since 2016. Thousands of setups. We've seen what works, what doesn't, and what's overpriced. We're here to help you make the right call.
Price Match Guarantee
Found it cheaper somewhere else? Let us know. We'll match any authorized retailer's price on the same product. No haggling required.
Free Fast Shipping on Most Items
Free standard shipping on most items. No minimums. Most accessories ship within 1–2 business days from US-based warehouses. Exclusions apply for oversized and freight items.
Real Golfer Tested
Our team are golfers and simulator owners. We test the products we sell and give honest feedback on the site, on YouTube, and in every consultation call.
Our Commitment to You
We Stick With You After the Sale
We're not just here for the transaction. Our team stays with you through setup, installation, and every swing after — because a great simulator room doesn't end at checkout.
-
SimSquad SupportAvailable Mon–Fri 9AM–7PM EST via phone, chat, and email
-
Nationwide Install ProgramWe'll physically set up your simulator anywhere in the US
-
Authorized DealerFull manufacturer warranty on every product we sell
-
Price Match GuaranteeFind it cheaper at any authorized dealer — we'll match it